Water Injection System in Ecomax Engine
Water injection in to the engine, exactly in to the intake manifold, is used to perform several functions simultaneously.
- Cooling the fuel-air mixture for the charge seals. The cooler the air, the more content of the oxygen. The content of the oxygen in the hot air is 17 %, in the cool air is 21 %.
- The water serves as the combustion catalyst. At a high temperature of the water is breaking into its components in the combustion chamber, oxygen and hydrogen. These gases are the catalysts of burning fuel-mixture and increase the combustion efficiency.
- Additional cooling of the engine. Water has possibility of a high heat capacity and taking away the excessive heat from the engine, carries it along with the exhaust fumes.
- Water vapor when heated vastly expand and further push the piston, similar to the locomotive traction.
- Water is natural solvent of the carboxylic deposits. That is why; water vapor is cleaned soot valve seat, a combustion chamber, an exhaust manifold and exhaust pipe.
This technology has used for the afterburner in the aviation since the Second World War. The most widespread in the sport:
The Bavarians install the water injection system in engine in the BMW M24.
The principle of operating is simple enough:
The water injection system “Ecomax” reads the information about operating of the engine from the several sensors simultaneously, after what is formed the control signal to the frequency and duration of the injector opening, located in the intake manifold. Water or water-methanol mixture from the reservoir pumped by a pump and fed through a tube to the nozzle. By means of a high-speed processor, which can be configured to a work even with a PC. This technology is used in sport, as in the simple car as well, an even for trucks, regardless of the fuel type: petrol, diesel or gas. The system of injection has no matter and can be installed in to the carburetor, injector, pump, pump injectors or CDI. During overwhelming of denotation, there is possibility the work of the engine for over lean mixtures, as well as in the mode of autothermia.
Depending on the goal while using the water injection system “Ecomax” you will get:
- Reducing the load on the crank denotation.
- Reducing of harmful emissions into the atmosphere.
- Increasing life engine, plugs, catalysts, diesel particulate filter.
- Fuel savings up to 30%.
- Increased power and torque.
- Go for gasoline with a lower octane rating.
Before buying, please consult our specialist.
There are no reviews yet.