Power Combustion Process (PCP-24)
Power Combustion Process is a device for saving fuel, which can be used for any internal combustion engine. The power combustion process is connected to a power source, usually to the battery and formed a signal of a certain power and duty cycle, through the metal engine via antenna, ant it is transferred to the combustion process oh the fuel and the air. Such the effect will allow transforming of the laminar combustion of the fuel of the resonance mode, whereby the increasing of the flame front propagation speed in 20-30% takes place.
As a result, by the using of PCP -2/4 you will get:
- Reduction of the fuel in 7-25%, depending on the efficiency of the ICE.
- Increasing of the torque in 5-15%.
- Reduction of the exhaust fumes.
- Increasing o the engine life.
- Reducing the pressure of crankcase gases.
- Increasing the share of plugs, valves, catalyst and particulate filter.
- Increased oil resource.
This device will be useful for cars, which engines run on the gas. It is well known, that the installation of the maintenance of the valve adjustments is recommended in two times more often than in the operation of gasoline motor. It is connected with that fact, that the duration of the combustion gas-air mixture much more, increasing speed TVS begins to burn in an open exhaust valves. Naturally, it leads to the accelerated wear. Engines with hydrojacks do not have this problem; the owner of the motor does not admit process, which takes place before the moment of the head repairing. In addition, the problems occurred often on gas “poor mixture” are signs of the increased temperature on the exhaust. It leads to the rapid failure of the catalyst.
Before buying, please consult our specialist.
There are no reviews yet.