Current Modulator M1-03
The current modulator is designed for control of the electrolytic process. It provides the working system depending on the engine regime and settings, which allow unloading the vehicle generator, without loss of processing power.
There is a choice of operating current, as well as its stabilization strictly in predefined range of the current consumption. In such way, you can achieve a stable processing power when the density of the electrolyte is changeable. In addition, the frequency can be choose, which allows increasing the efficiency of the electrolyzer.
The modulator is constructed on the modern reliable components, which guarantee the high efficiency and reliability. Practically, it is not heated. The kit is consist of the remote display “normal”, which is installed in the cabin and show the normal stable work of the system, density of the electrolyte as well.
In case of overheating of electrolyzer or modulator, the protection trips. The modulator has different connectors for external control, which gives the opportunity to connect several modulators simultaneously, and the output to connect external equipment with a built-in the current sensor as well.
|The current limit, А||5 … 35
|Modulator working frequency (regulated),kHz||0.25 … 3|
|The range of the automatic power control of the power and consumption and gas outlet, %||0 … 100|
|The possibility of combining the modulators and external control||Yes|
|The maximum operating temperature of electrolyzer (protection threshold), оС||77
|Protection from overheating of modulator оС||110|
|Stabilization of the current output||Yes|
|Preventing from short-circuit in the electrolytic cell||Yes (95А)|
|Operating voltage, V||10 … 28|
|Integrated filter power||Yes|
|Indicator density of the solution (Indicator «normal»)||Yes|
|The threshold of the current indicator «normal» (solution density indicator), А||12 … 35
|Regulation of the sensitivity of the pinking sensor||Yes (Automatic)|
There are no reviews yet.